Dog Treat Jar

Materials

• #15-0200 Armour Etch Glass Etching Cream
• #21-1663 Over N Over stencil- PAWS
• #21-1645 Over N Over stencil - REVERSE MR MRS
• #21-1643 Over N Over stencil- WESTERN FONT
• Airtight glass canister

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. After preparing the glass, draw a centerline down the back of the canister. Follow the guide for creating a centerline if you do not know how. Turn the glass around so the line is visible through the front
2. Take the letter O from the Western Font sheet and place it near the top of the canister jar with the centerline running down the middle.
3. Place the letters D and G from the same on either side of the O.
4. Place the large dog bone stencil at an angle on one side of the word DOG.
5. Using the centerline as a guide, position the food dish stencil under the DOG.
6. Inside the food dish, on either side of the centerline, place the letters E and A from the Reverse Mr Mrs sheet. Continue placing the letters, from the middle out until the word is complete. For help with lettering, follow the guide for lettering.
7. Follow the etching cream instructions to etch these items onto the glass.
8. Place the large bone stencil on the side of the word DOG where there is an empty space. Try to copy the angle of the bone on the other side.
9. Follow the etching cream instructions to etch the bone onto the glass,